Roofing takeoff
Roofing takeoffs — AI measures, professionals verify
Turn plans or an Xactimate estimate into a roofing material takeoff you can review and order. Every quantity traced to its source.
Roofing takeoffs live or die on the geometry — squares, ridge and hip length, valleys, and waste on cut-up roofs. TrueTakeoff turns roof measurements or an estimate into shingles, underlayment, and accessories with pitch-aware waste.
Roofing materials, ready to buy
TrueTakeoff converts the roofing scope into an orderable material list — including the consumables that usually get missed: shingles (bundles/squares), underlayment / felt, ridge cap & vent, drip edge & flashing, starter strip, nails & sealant.
Every line carries the source it was derived from, so an estimator can verify the math before a purchase order goes out.
What TrueTakeoff measures for roofing
- Roof area (squares)
- Ridge, hip & valley length (LF)
- Eave & rake length (LF)
- Pitch & waste factor
- Penetrations & flashing count
- Number of layers to tear off
Frequently asked
- Does it apply waste for steep or cut-up roofs?
- Yes — waste is applied by pitch and complexity so the shingle and starter counts reflect real coverage, not just flat area.
- Can it read a Hover or aerial measurement?
- Roof measurements from an estimate (squares, ridge/hip/valley) are read and converted directly into the material takeoff.
- Does AI replace the estimator?
- No. AI measures and drafts the takeoff; a professional reviews and approves it. TrueTakeoff is an assistant, not a replacement.
Run a roofing takeoff on your own plans
Upload one estimate or plan set and review the material list before you order.