Insulation takeoff
Insulation takeoffs — AI measures, professionals verify
Turn plans or an Xactimate estimate into a insulation material takeoff you can review and order. Every quantity traced to its source.
Insulation takeoffs are area by assembly and R-value. TrueTakeoff measures wall, ceiling, and floor area and converts it into batts, blown-in, or board at the specified R-value.
Insulation materials, ready to buy
TrueTakeoff converts the insulation scope into an orderable material list — including the consumables that usually get missed: batt insulation (sf), blown-in (bags), rigid board (sf), vapor barrier, fasteners & tape, netting.
Every line carries the source it was derived from, so an estimator can verify the math before a purchase order goes out.
What TrueTakeoff measures for insulation
- Wall / ceiling / floor area (SF)
- R-value by assembly
- Cavity depth
- Batt vs. blown-in vs. board
- Vapor barrier area
- Confined-space add-ons
Frequently asked
- Does it handle different R-values by assembly?
- Yes — walls, ceilings, and floors can carry different R-values, and the material is sized to each.
- Does AI replace the estimator?
- No. AI measures and drafts the takeoff; a professional reviews and approves it. TrueTakeoff is an assistant, not a replacement.
Run a insulation takeoff on your own plans
Upload one estimate or plan set and review the material list before you order.