Framing takeoff
Framing takeoffs — AI measures, professionals verify
Turn plans or an Xactimate estimate into a framing material takeoff you can review and order. Every quantity traced to its source.
Framing takeoffs are a lumber-and-sheathing count driven by wall length, height, and spacing. TrueTakeoff computes studs, plates, headers, and sheathing from the plans or scope.
Framing materials, ready to buy
TrueTakeoff converts the framing scope into an orderable material list — including the consumables that usually get missed: studs & plates, headers & lvl, sheathing (osb/ply), fasteners & connectors, house wrap, blocking.
Every line carries the source it was derived from, so an estimator can verify the math before a purchase order goes out.
What TrueTakeoff measures for framing
- Wall length & height (LF/SF)
- Stud count at spacing
- Plates (LF)
- Headers & openings
- Sheathing area (SF)
- Fastener schedule
Frequently asked
- Does it size studs by spacing?
- Yes — stud and plate counts are derived from wall length, height, and the on-center spacing in scope.
- Does AI replace the estimator?
- No. AI measures and drafts the takeoff; a professional reviews and approves it. TrueTakeoff is an assistant, not a replacement.
Run a framing takeoff on your own plans
Upload one estimate or plan set and review the material list before you order.